How To Fix Attic Ladder Spring | A Step-By-Step Guide

Last Updated on March 12, 2022 by William R. Vargas

Attic ladders come with coil springs. The springs are what keeps the attic door evenly closed. Also, these prevent the ladder from swinging too far out when the door is opened.

However, the springs can get loose, rusted, or broken with time and use. A broken spring means the attic door won’t close evenly. Moreover, it can cause the ladder to fall out anytime and injure someone.

Are you dealing with a damaged attic ladder spring too?

Then, read on to find out everything you need to know about fixing the spring for the attic ladder. We have explained how to fix attic ladder springs in a step-by-step manner to make this task easier for you.

How To Fix Attic Ladder Spring

Fixing the attic ladder spring is not a difficult task if you follow these steps properly. But the job will be much easier if you’ve got a helping hand.

Collect the Tools

The first thing you’ll need for fixing the ladder spring is a new spring. Fortunately, attic ladder spring replacement can be easily found in local hardware stores.

Other than that, you’ll need a screwdriver, wrench, pliers, and bolts. If your attic doesn’t have a light, you’ll need a flashlight.

Check the Springs

Now, you need to identify the problem with the springs. Are they rusted or damaged? Or are they just loose?

If the springs are broken or damaged, you’ll need to replace them. But if they are loose, adjusting them can solve the problem.

1. Replacing the Ladder Springs

There are two ways of replacing the attic ladder spring. You can fix it from inside of the attic or from outside.

From Inside the Attic

Step 1: Get Inside the Attic

Pull the attic stairs down, and climb up to the attic. If the spring is broken, use a stepladder to go up. Also, make sure your attic has sufficient lighting.

Step 2: Close the Door

When you are inside the attic, ask your helper to push the attic door closed. The springs are in a more relaxed state when the door is closed.

Step 3: Loosen the Springs

The springs are attached to the steel arms of the ladder with lock nuts. Start with one spring.

Rotate the lock nut counterclockwise using the wrench to loosen it. Also, to decrease the tension on the spring, move the turnbuckle counterclockwise with your hands.

Step 4: Remove the Springs

Take out the nuts and unhook the turnbuckle from the steel arm. The spring will become free from the ladder arm. Then, remove the other side of the spring from the bracket attached to the door hinge.

Step 5: Add the New Spring

Attach one end of the new spring to the bracket using steel studs. Then hook the other end to the turnbuckle of the ladder arm.

Step 6: Tighten the Turnbuckle

Rotate the turnbuckles clockwise until the attic door stays properly closed without your helper pushing from outside. Next, place the lock nuts in place and rotate them clockwise to tighten properly.

Use the same steps to remove the other spring and add a new one.

From Outside Of the Attic

Step 1: Remove the Door

Open the attic door. Then unscrew the hinge from the door. Keep the hinge in a safe place as you’ll need it again to re-install the door. Now that the attic door is separated from the ladder, move it aside.

Step 2: Remove the Spring

Unscrew the spring from the ladder arm first. Then fold it back to keep it level. Next, unscrew the other end of the spring from the bracket on the attic floor.

Step 3: Attach the New Spring

Now attach the spring to the bracket on the attic floor. Use the steel studs to fix it in place. Then hook it to the turnbuckles and the ladder arm.

Do this on both sides of the ladder. Then fold and unfold your ladder to make sure the spring works correctly.

Step 4: Re-Attach the Door

Now that your ladder springs are fixed, re-attach the attic door using the hinges removed earlier.

2. Adjust the Ladder Springs

Step 1

Get up in the attic and close the attic door. And now check the springs.

Step 2

There are adjustment nuts on the stems of the turnbuckle that connect the spring to the ladder arm. Locate them first.

Step 3

Now use a wrench to loosen the locking nut securing the adjustment nut.

Step 4

When the ladder springs get loose, a gap creates between the door and the frame. To remove this gap, rotate the adjustment nut clockwise until the gap closes.

Step 5

Ask your helper to pull the door down and push it close again. See if the door closes properly. Then fix the locking nuts in place with the wrench.

Frequently Asked Questions

Do you still have some confusion about fixing the attic ladder spring? Don’t worry. We have answered some of the common questions to clear up your confusion.

Question: How long would it take to fix the ladder spring?

Answer: It can take anywhere between 30 minutes to 1 hour. The task will take less time if you’ve got a helper.

Question: Which ladder should I get for my attic? Aluminum or steel?

Answer: Steel ladders are more durable and expensive. Aluminum ones are usually affordable and fire-resistant. Choose one based on your budget and requirements.

Question: How much weight can the ladder springs hold?

Answer: Ladder springs can hold from 225 to 275lbs weight. If your ladder is aluminum, it can hold up to 350lbs.

Question: How much do ladder springs cost?

Answer: Ladder springs are not that costly. They can cost from 5 to 10 dollars.

Question: Can I fix my ladder spring alone?

Answer: Yes, you can. For this, you will have to follow the second method we explained and fix the springs from outside of the attic.

Final Words

A damaged attic ladder spring is an accident waiting to happen. Therefore, you need to act immediately when you notice a malfunction with the attic ladder or door. To help you in this, we have discussed the steps of fixing the ladder spring and answered some common questions regarding this topic.

Hopefully, our guide on how to fix attic ladder spring has answered all your queries. So what are you waiting for? Gather your tools and let’s start fixing the ladder spring.

Leave a Comment